Mazdamanuals.com

WASHER MOTOR INSPECTION

id091900805100

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Disconnect the rear washer hose from the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)

Warning

•  Water sprayed on the battery and ground could cause electrocution. When performing the washer motor inspection, prepare a container to collect washer fluid and be careful not to spray washer fluid.

3.  After connecting washer motor terminal B to the positive battery terminal, and terminal A to ground, verify that washer fluid sprays from the front side of the washer motor.

B+ terminal	Ground terminal	Operation
B	A	Front

am3zzw00027226

•  If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)

4.  After connecting washer motor terminal A to the positive battery terminal, and washer motor terminal B to ground, verify that washer fluid sprays from the rear side of the washer motor.

B+ terminal	Ground terminal	Operation
A	B	Rear

am3zzw00027227

•  If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)