Home

Mazdamanuals.com

DTC U007A:00 [EMERGENCY CALL UNIT]

id0902s6126500

Outline

System malfunction location

Module communication error (CAN Bus No.8)

Detection condition

•  The emergency call unit detects a CAN BUS communication line (CAN Bus No.8) malfunction.

Fail-safe

Not applicable

Possible cause

•  Malfunction in CAN bus communication line

•  Emergency call unit malfunction

System wiring diagram

Not applicable

System malfunction location	Module communication error (CAN Bus No.8)
Detection condition	• The emergency call unit detects a CAN BUS communication line (CAN Bus No.8) malfunction.
Fail-safe	Not applicable
Possible cause	• Malfunction in CAN bus communication line • Emergency call unit malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

Step

Inspection

Results

Action

1

INSPECT CAN COMMUNICATION LINE

•  Perform an inspection in accordance with the multiplex communication system diagnostic procedure.
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

•  Is the CAN communication line normal?

Yes

Replace the emergency call unit and perform the repair completion verification.

(See EMERGENCY CALL UNIT REMOVAL/INSTALLATION.)

No

Repair or replace the malfunctioning location and perform the repair completion verification.

(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

Repair completion verification

VERIFY IF OTHER DTC IS DISPLAYED

•  Perform the DTC inspection.
(See DTC INSPECTION.)

•  Are any other DTCs displayed?

Yes

Repair the malfunctioning location according to the applicable DTC troubleshooting.

No

DTC troubleshooting completed.

Step	Inspection	Results	Action
1	INSPECT CAN COMMUNICATION LINE • Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].) • Is the CAN communication line normal?	Yes	Replace the emergency call unit and perform the repair completion verification. (See EMERGENCY CALL UNIT REMOVAL/INSTALLATION.)
1		No	Repair or replace the malfunctioning location and perform the repair completion verification. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)
Repair completion verification	VERIFY IF OTHER DTC IS DISPLAYED • Perform the DTC inspection. (See DTC INSPECTION.) • Are any other DTCs displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting.
Repair completion verification		No	DTC troubleshooting completed.