Home

Mazdamanuals.com

DTC U0101:00 [BODY CONTROL MODULE (BCM) (E)]

id0902r70957s3

Outline

System malfunction location

Communication error with TCM

Detection condition

•  The body control module (BCM) cannot receive CAN signal from the TCM.

Fail-safe

•  Sets to default signal.

•  Cancel the i-stop control.

Possible cause

•  Malfunction in CAN communication line between TCM and body control module (BCM)

System wiring diagram

Not applicable

System malfunction location	Communication error with TCM
Detection condition	• The body control module (BCM) cannot receive CAN signal from the TCM.
Fail-safe	• Sets to default signal. • Cancel the i-stop control.
Possible cause	• Malfunction in CAN communication line between TCM and body control module (BCM)
System wiring diagram	Not applicable

Diagnostic Procedure

• Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)